[base]
i2c_device = /dev/i2c-1
webserver  = true
vfs        = true
loglevel   = info

[digitalout]
allowed_user = 

[analogout420ma]
allowed_user =
# Per-board calibration of the 4-20mA output, one key per module I2C address:
# gain:offset with offset in mA (measured = gain * nominal + offset).
# Normally set through PUT /api/v1/module/analogout420ma/<address>/calibration.
# calibration_0x60 = 1:0

[analogout010v]
allowed_user =
# Per-board output calibration, one key per module I2C address, outputs 1-4
# (left to right) as gain:offset with offset in V - measured = gain * set +
# offset. Normally set through PUT /api/v1/module/analogout010v/<address>/calibration.
# calibration_0x60 = 1:0, 1:0, 1:0, 1:0

[etemperature]
allowed_user        = 
i2c_address         = 0x52
samplerate          = 6
shared_file_enabled = true
shared_dir          = /var/run/smartpi
shared_file         = smartpi_etemperature_values

[lorawan]
lorawan_enabled       = false
shared_files_path     = /var/run/smartpi/trafobox_values
shared_files_elements = 1:2f:1.0|2:2f:1.0|3:2f:1.0|4:2f:1.0|5:2f:1.0|6:2f:1.0|7:2f:1.0|8:2f:1.0|9:2f:1.0|10:2f:1.0|11:2f:1.0|12:2f:1.0|13:2f:1.0|14:2f:1.0|15:2f:1.0|16:2f:1.0|17:2f:1.0|18:2f:1.0|19:2f:1.0|20:2f:1.0|21:2f:1.0|22:2f:1.0|23:2f:1.0|24:2f:1.0|25:2f:1.0|26:2f:1.0|27:2f:1.0|28:2f:1.0|29:2f:1.0|30:2f:1.0|31:2f:1.0|32:2f:1.0|33:2f:1.0|34:2f:1.0|35:2f:1.0|36:2f:1.0|37:2f:1.0|38:2f:1.0|39:2f:1.0|40:2f:1.0|41:2f:1.0|42:2f:1.0|43:2f:1.0|44:2f:1.0|45:2f:1.0|46:2f:1.0|47:2f:1.0|48:2f:1.0|49:2f:1.0|50:2f:1.0|51:2f:1.0|52:2f:1.0|53:2f:1.0|54:2f:1.0
interval              = 300
serial_port           = /dev/ttyS0
applicationEUI        = 
applicationKey        = 
datarate              = 5
shared_file_enabled   = true
